955 Canal Road Extd., Manchester, PA 17345, US

Welcome to Artistry In Titanium

Titanium Guitar Items

Titanium Guitar Control Knobs

The new "Maximus" Titanium Guitar Knobs (center photo) are machined from solid ø1.00" 6AL4V titanium bar stock.  These cylindrical knobs are bored for potentiometers with ø1/4" shafts and lock in place with a stainless steel 6-32 x 3/8" long socket head set screw.


Each one is approximately .700" tall and features a band of circumferential grooves on the O.D.  A series of ascending dots on the top lies inside the chamfered edge. They are furnished in a satin polished finish.


A second design is the Ti-Top Hat knob (right side photo. These are also machined from solid ø1.00" 6AL4V titanium bar, but feature the classic Top Hat shape and are drilled for the smaller potentiometer shafts. (They can be machined to fit ø.250" shafts as well - just let me know when ordering.) These knobs have a band of three narrow grooves on the tapered top diameter and feature a single indicator dot on top. They are approximately .685" tall and furnished in a satin polished finish.


The third design is the "Alien" Guitar Knob (left side photo). These are machined from solid ø.750" 6AL4V titanium bar and are drilled for the smaller potentiometer shafts. (These can be machined to fit ø.250" shafts as well - just let me know when ordering.) 


The "Alien" Knobs are approximately .746" tall and feature my special "Alien" pattern on the tops and 2 bands of thin grooves at the top and bottom.


An appropriate hex wrench (as shown) will be included with every order.

********************************************************

The "Maximus" Titanium Guitar Knobs sell for $41.00 each. Add $7.20 for postage to US destinations.  

The "Ti-Top Hat" Guitar Knobs are $47.50 each. Add $7.20 for postage to US destinations.

The "Alien" Titanium Guitar Knobs are $49.50 each. Add $7.20 for postage to US destinations.

Sorry, no foreign orders for these guitar knobs can be accepted.

Guitar Strap Buttons

The new "OS" and "RT" Titanium Guitar Strap Buttons are machined from solid ø.666" 6AL4V titanium bar stock.  


The "OS" design is a conventional tapered button, but is oversized to help prevent your strap from slipping off. 


The "RT" (reverse taper) design is another style that helps retain your strap, even if the holes in your strap are a bit oversized.


Both styles of strap buttons come furnished with stainless steel screws and felt washers as shown.


A pair or either style titanium strap buttons sells for $40.50. plus $3.50 for postage to US destinations.  

Titanium Switch Tips

These Titanium Switch Tips are machined from ø.375" 6AL4V titanium bar stock. These have 8-32 threads to fit many US made guitars. 


Each one is approximately .720" tall, features a band of circumferential grooves on the O.D. near the top, and has a satin polished finish as shown.


Each Titanium Guitar Switch Tip sells for $22.00. Add $3.50 for postage to US destinations. Sorry, no foreign orders can be accepted. 

Parker Tremolo Arm

This version replaces the factory foam-tipped steel arms on Parker® guitars.

The arm, itself, is made from solid ø3/16" 6AL4V titanium.


The tip is machined from solid ø10mm 6AL4V titanium. It features 12 shallow grooves for enhanced control.


The arm and tip are securely press fit together and completely satin polished.

This is a direct replacement for your factory tremolo arm on the "refined" models. (It does not replace the early 1990's Parker® Fly hexagonal arm.)


These sell for $75.00, shipped to a US destination. Sorry, no foreign orders can be accepted.

Titanium Guitar Slides


These new Titanium Guitar Slides are lighter than most traditional glass, steel, or ceramic slides. Each one is made from high quality Grade 9 seamless titanium tubing. Compared to other metals, they offer a superior strength-to-weight ratio, there is no corrosion and no  plating to wear off. And, they won't chip or break like glass or ceramic slides.


The Standard Ti-Guitar Slide weighs 1.5 oz. and has a 1" outer diameter and 1/16" wall thickness. Both ends of the 3" long tube have been hand cut to remove sharp edges before the entire slide is satin polished.  It is intended for use with your ring finger.


The "Pinky" Ti-Guitar Slide weighs only 0.5 oz. and has a 3/4" outer diameter and 1/32" wall thickness. Both ends of the 2 1/4" long tube have been hand cut to remove sharp edges before the entire slide is satin polished.  As the name implies, it is meant to be used with your "pinky finger".


---------------------------------------------------------

The Standard size sells for $25.00 each and the "Pinky" slide sells for $20.50 each. Add $3.50 for postage to US destinations.  

Sorry, no foreign orders can be accepted.

Ordering link:

Please note I only make the parts listed on this page and do not accept orders for other guitar parts. 


Just click on the following link to email me with your ordering information:



Email Tom